Minggu, 24 Juni 2012

Billing Setting Hotspot Mikrotik Router Integration

Billing Setting Hotspot Mikrotik Router integration is easy, after the install mikrotik correctly, run the application "Winbox Loader" so that you can configure the Mikrotik Router from the Windows Desktop to easily and quickly without having to memorize the command line Mikrotik. After double-click the Winbox application will appear as follows:
 
After that click on the sign ... it will display the MAC address Mikrotik was active in this double-click the Mac Address 00:0 B: CD: 64: D9: 22 and enter the user admin and default password is blank and click "Connect"
 
IP ==> Address ListClick the plus sign | + | then on the "Address" then input the desired number eg IP 192.168.1.110/24 (slash 24 means later will automatically fill in the Network and Broadcast). Then in the "Interface" select ether1 where ether1 to be connected to the modem / ISP.
 
IP ==> Route ListClick the plus sign | + | then on the "Gateway" fill your Gateway IP, eg 192.168.1.1 Then click "OK"
 
New TerminalThen the console will appear as follows, and then do a ping to your Internet Gateway, type ping 192.168.1.1 If this works then it will look like the picture below and that means a network of Mikrotik to the Gateway / Modem has been connected with the normal.
 
Interface ==> Interface ListThis is to see the interface or the Ethernet card which is active (to connect to the network) is in position "Tx" and "Rx" will display traffic xxx bps. In case this is ether1 is connected to a LAN network
 
IP ==> DNSThen click the "Settings" in the "Primary DNS" and enter 202.134.1.10 DNS1 eg on the "Secondary DNS" and enter 202.134.0.155 DNS2 eg if after clicking "OK"
 
New TerminalPerform testing ping out to the internet is such to google.com by typing ping google.com if results like this then you already connect internet connection.
 
IP ==> == Hotspot> Hotspot SetupIn the "Hotspot Interface" ether select which one to be made in to a hotspot, in this case and if there is ether3 wireless wireless antenna you choose. Then click "Next"
 
In the "Local Address of Network" is your Hotspot Gateway, then click "Next"
 
In the "Address Pool of Network" is a DHCP IP Range that will be provided to the user hotspot. You can specify what IP range like in this case is from 10.5.50.2 s / d 10.5.50.254 then click "Next"
 
In the "Select Certificate" select "none" then click "Next"
 
In the "IP Address of SMTP Server" leave it blank and click "Next"
 
In the "DNS Servers" has been filled properly and control your company can click on the "Next"
 
In the "DNS Name" leave it blank and click "Next"
 
Then just click "Next"
 
When finished it will display the following dialog box then click "OK"
 
Then continue with the configuration to connect to the Hotspot Mikrotik Hotspot Billing software as follows:IP ==> Hotspot ==> Server Profiles ==> hsprof1 (2x click)From the tab "General" tab to move to "Login" and then remove the check mark (uncheck) the "Cookies" then click "Apply"
 
Then move to the tab "Radius" and remove the check mark (uncheck) the "Use RADIUS" then click "Apply" then click "OK"
 
RadiusClick the plus sign | + | and on the General tab check the hotspot service later in the "Address" enter the IP Address Billing Hotspot radius server (Linux PC) and "Secret" secret id eg 123 457 890 fill as you fill in Linux, then if finished click "OK"
 
In order for User Login Page Hotspot Billing Hotspot login page appears as shown below
 
IP ==> == HotSpot> Walled GardenClick the plus sign | + | and the position of "Action = allow" select "Dst. Address "enter the IP number Hotspot Billing server, eg 192.168.1.10 then click" OK "
 
If you upload your finished files into mikrotik already in the configuration by Team Hotspot Billing softwareThe next step for Hotspot Billing is integrated with Mikrotik Router, you have to login to the Billing Hotspot Manager. Enter a username, password and Security Code to the right as shown below.
 
After a successful entry into the Hotspot Billing Manager, entered Preference Menu ==> Setting Service ==> Choose / var / www / html / config.client.php then click "Edit" and when finished click "Save"$ IpServer = "192.168.1.2"; ==> insert a Hotspot Billing Server IP number$ IpMikrotik = "192.168.1.10"; ==> enter the IP Router Mikrotik$ UserMikrotik = "admin"; ==> insert a user name Mikrotik Router$ PassMikrotik = "admin"; ==> insert a password Mikrotik Router
 
If you can not be saved into the Konsole as root on Linux and type the command chmod 775 / var / www / html / config.client.phpLogin Preference ==> Service Settings ==> Select the / etc / raddb / clients.conf then click "Edit" pull the scroll to the bottom line and add the following four lines of command and when finished click "Save"client 192.168.1.2 ==> fill in the IP Router Mikrotiksecret = 123457890 ==> insert a RADIUS secret fit in Mikrotikshortname = mikrotik ==> fill in the name of the label 'mikrotik'
 
Login Preference ==> Service Settings ==> Select the / etc / raddb / naslist then click "Edit"
 
If you can not be saved into the Konsole as root on Linux and type the command chmod 775 / etc / raddb / naslist

Tidak ada komentar:

Posting Komentar