Billing Setting Hotspot Mikrotik Router Integration

Billing Setting Hotspot Mikrotik Router integration is easy, after the install mikrotik correctly, run the application "Winbox Loader" so that you can configure the Mikrotik Router from the Windows Desktop to easily and quickly without having to memorize the command line Mikrotik. After double-click the Winbox application will appear as follows:
 After that click on the sign ... it will display the MAC address Mikrotik was active in this double-click the Mac Address 00:0 B: CD: 64: D9: 22 and enter the user admin and default password is blank and click "Connect"
 IP ==> Address ListClick the plus sign | + | then on the "Address" then input the desired number eg IP 192.168.1.110/24 (slash 24 means later will automatically fill in the Network and Broadcast). Then in the "Interface" select ether1 where ether1 to be connected to the modem / ISP.
 IP ==> Route ListClick the plus sign | + | then on the "Gateway" fill your Gateway IP, eg 192.168.1.1 Then click "OK"
 New TerminalThen the console will appear as follows, and then do a ping to your Internet Gateway, type ping 192.168.1.1 If this works then it will look like the picture below and that means a network of Mikrotik to the Gateway / Modem has been connected with the normal.
 Interface ==> Interface ListThis is to see the interface or the Ethernet card which is active (to connect to the network) is in position "Tx" and "Rx" will display traffic xxx bps. In case this is ether1 is connected to a LAN network
 IP ==> DNSThen click the "Settings" in the "Primary DNS" and enter 202.134.1.10 DNS1 eg on the "Secondary DNS" and enter 202.134.0.155 DNS2 eg if after clicking "OK"
 New TerminalPerform testing ping out to the internet is such to google.com by typing ping google.com if results like this then you already connect internet connection.
 IP ==> == Hotspot> Hotspot SetupIn the "Hotspot Interface" ether select which one to be made in to a hotspot, in this case and if there is ether3 wireless wireless antenna you choose. Then click "Next"
 In the "Local Address of Network" is your Hotspot Gateway, then click "Next"
 In the "Address Pool of Network" is a DHCP IP Range that will be provided to the user hotspot. You can specify what IP range like in this case is from 10.5.50.2 s / d 10.5.50.254 then click "Next"
 In the "Select Certificate" select "none" then click "Next"
 In the "IP Address of SMTP Server" leave it blank and click "Next"
 In the "DNS Servers" has been filled properly and control your company can click on the "Next"
 In the "DNS Name" leave it blank and click "Next"
 Then just click "Next"
 When finished it will display the following dialog box then click "OK"
 Then continue with the configuration to connect to the Hotspot Mikrotik Hotspot Billing software as follows:IP ==> Hotspot ==> Server Profiles ==> hsprof1 (2x click)From the tab "General" tab to move to "Login" and then remove the check mark (uncheck) the "Cookies" then click "Apply"
 Then move to the tab "Radius" and remove the check mark (uncheck) the "Use RADIUS" then click "Apply" then click "OK"
 RadiusClick the plus sign | + | and on the General tab check the hotspot service later in the "Address" enter the IP Address Billing Hotspot radius server (Linux PC) and "Secret" secret id eg 123 457 890 fill as you fill in Linux, then if finished click "OK"
 In order for User Login Page Hotspot Billing Hotspot login page appears as shown below
 IP ==> == HotSpot> Walled GardenClick the plus sign | + | and the position of "Action = allow" select "Dst. Address "enter the IP number Hotspot Billing server, eg 192.168.1.10 then click" OK "
 If you upload your finished files into mikrotik already in the configuration by Team Hotspot Billing softwareThe next step for Hotspot Billing is integrated with Mikrotik Router, you have to login to the Billing Hotspot Manager. Enter a username, password and Security Code to the right as shown below.
 After a successful entry into the Hotspot Billing Manager, entered Preference Menu ==> Setting Service ==> Choose / var / www / html / config.client.php then click "Edit" and when finished click "Save"$ IpServer = "192.168.1.2"; ==> insert a Hotspot Billing Server IP number$ IpMikrotik = "192.168.1.10"; ==> enter the IP Router Mikrotik$ UserMikrotik = "admin"; ==> insert a user name Mikrotik Router$ PassMikrotik = "admin"; ==> insert a password Mikrotik Router
 If you can not be saved into the Konsole as root on Linux and type the command chmod 775 / var / www / html / config.client.phpLogin Preference ==> Service Settings ==> Select the / etc / raddb / clients.conf then click "Edit" pull the scroll to the bottom line and add the following four lines of command and when finished click "Save"client 192.168.1.2 ==> fill in the IP Router Mikrotiksecret = 123457890 ==> insert a RADIUS secret fit in Mikrotikshortname = mikrotik ==> fill in the name of the label 'mikrotik'
 Login Preference ==> Service Settings ==> Select the / etc / raddb / naslist then click "Edit"
 If you can not be saved into the Konsole as root on Linux and type the command chmod 775 / etc / raddb / naslist

How to Create or Making USB Power Injector

How to Make, Making Power Injector USB Modem, Wi-Fi. USB Extender with a length of more than 8 feet is often an error when used to connect the USB Air Card Modem and Wireless LAN. Actually, this error does not always occur in any type of device that uses USB Extender with over 8 feet long. For example, a USB Extended through 12 meters, usually no error will occur during their use of Flash Disk Device, but this does not guarantee that the 12-meter USB Extended earlier can be used for the Device in the form of Wi-Fi LAN or Air Card Modem. 
So we should not be surprised if the 12-meter USB Extender that we can use for Flash Disk did not work when we use the LAN or Wireless Air Card Modem. How this could happen?This happens because of lack of supply of delivery resources that go into Device power. Each conductor / cable resistance, the type and the longer the cable the greater the prisoner. Therefore, when there is current flowing in the USB cable Extender, there will be a voltage loss along the cable so that the voltage falls to the load (Device) will be equal to the voltage source voltage is reduced losses in the cable. 
The amount of voltage loss would be directly proportional to the strong current flowing in the Extended USB cable. Thus on each load / device will be different in different voltage losses because each device has a different current consumption. A Flash Disk has a much smaller current consumption than the Air Card Modem or Wi-fi. So did most of the Wi-fi has a smaller current consumption of the modem.That's why the 12-meter USB Extender can be used for error or Flash Disk often can not even be used for Air Card Modem or Wi-fi that has a greater current consumption. Even in extreme conditions the device is not detected at all. 
To overcome this is to build Power Injector USB modem or Wi-fi is a way to raise the voltage fall / get the device to match the value that should be the 5 Volt DC. In standard conditions, the voltage is 5 VDC from the USB connector on the CPU with the black cable to Ground (Zero) and the color Red for Positive (+) its 5Volt. To raise external power supply is used as commonly applied to the Access Point or often called USB Power Injector. You need to prepare are:• 1 piece Box / Small Box kira2 size 10 x 15 x 5 cm as Injector Power USB box. Can be of plastic or of the plate. Used as a mounting box with its Wi-Fi LAN can also be provided that enough• AN7805 IC or AN7805F and cooling plate. Remember ..!! do not use AN78L05.• Cable to taste• Solder and Lead Solder 
Do the following:Prepare the USB Extender that has been extended (eg 12 meters), making USB Extender can be Read Here. Then dismantle the connection between the UTP cable with its connector and USB connector on both ends (of the CPU or the Device).Once unloaded, for the first part we are working on a device that is connected to the stabilizer. Extended Cut the USB cable connection to the combined red-orange cable orangeputih of UTP ... and rangkailah USB Power Injector like the following scheme:
 

Do not forget to install the cooler on its AN7805 IC ComponentsAfter that we're working on that part of the USB on the CPU resources. Extended Cut the USB cable connection to the combined red-orange wires of UTP and rangkailah orangeputih USB Power Injector like the picture above. Take a piece of wire and connect it to the yellow wire (+12 V) on the PS CPU.Red wire coming from the left USB CPU and is not used, cap / Isolate to be safe from a short circuit.Before you use a USB power injector, it would not hurt if you Test-tengangan first voltage at the measurement point as shown schemes with Volt-meter (AVO). Keep tension on the leg AN7805 IC no.1 is +12 V and +5.0 V is the No. 3 feet (Stable) in practice is usually close to 5.0 VDC, approximately 4.8 s / d 4.9 V. 
Do not forget to close the connections back to isolation!Furthermore you try to load plug its USB Power Injector. Try to use the Flash Disk and do access, including transfer and copy data to and from Flashdiks. OK then if you put the Air Card Modem Device or Wi-Fi LAN. Make a connection and browsing. Perform repeated measurements of work stress on the leg AN7805 IC no.1 should range from 11 VDC.Built in USB Power Injector, sometimes hard to get good quality IC AN7805 IC so easy to heat and easily broken. For that you can use another type KA78T05xx with nominal currents up to 3 Amp. or fixed AN7805 with a transistor amplifier circuit currents TIP41C as follows:

The size of the voltage drop can also result from the type (brand) UTP cable is used to build USB Power Injector.