How to make a USB extender. Ingredients:

1. ordinary USB cable, standard aja yg 1 m or 0.5m.
2. Wired LAN / UTP cabling for the network.


Step 1: The USB cable is tested before use USB flash disk in the computer, it is still functioning or not. If it is OK, cut into 2 parts. There are usually red, black, and white, green. Red and black are usually for 5V supply voltages. Green white is usually a USB data cable.

Step 2: Cut and peel the ends of the LAN cable. Of the LAN cable have 8 colors. Of 8 LAN cable ends earlier, merge several pairs that stayed 4 LAN cable ends.

* Combined with orange orange white wires (2 wires so 1)
* Green white cable (1 cable)
* Green cable (1 cable)
* Combination of blue and white wires, blue, white, brown, brown (4 wires so 1)

Step 3: Connect the ends of the USB cable to the LAN cable ends as follows:

* White orange - orange (2 wires) (UTP) = red (USB)
* White green (1 cable) (UTP) = white (USB)
* Green (1 cable) (UTP) = green (USB)
* White-blue, blue, white, brown, brown (4 wires) (UTP) = black (USB)

Make sure each connection in isolation use masking tape to Rapet

Step 4, the most important: set speed USB port on the computer motherboard to be USB 1.1, not USB 2.0. USB 1.1 has a maximum speed of 10Mbps, so more reliable for long-distance attractiveness compared to USB 2.0.