Mikrotik Router Hotspot Billing Integration Setting

Setting Mikrotik Router Hotspot Billing integration is straightforward that, through mikrotik installed correctly, run the application "Winbox Loader" so that you can configure Mikrotik Router from the Windows desktop to easily and quickly without having to memorize the command line Mikrotik. After double click the Winbox application will appear as follows:

After that Click ... it would appear MAC Address Mikrotik current in this case double-click the Mac Address 00:0 B: CD: 64: D9: 22 and fill in the user admin and the default password is blank and then click "Connect"

IP ==> Address ListClick the plus sign | + | then the "Address" then enter the desired IP number eg 192.168.1.110/24 (slash 24 means later will automatically fill in the Network and Broadcast). Then in the "Interface" select ether1 ether1 which will be connected to the modem / ISP.
 IP ==> Route ListClick the plus sign | + | then on "Gateway" fill your Gateway IP, eg 192.168.1.1 Then click "OK"
 New TerminalThen will appear the following console and then do a ping to your Internet Gateway, type ping 192.168.1.1 If successful it will look like the image below and it means a network of Mikrotik to Gateway / modem connected to normal.
 Interface ==> Interface ListIt is to see the interface or the Ethernet card which is active (to connect to the network) is in position "Tx" and "Rx" will display traffic xxx bps. In case this is ether1 is connected to a LAN network
 IP ==> DNSThen click "Settings" in the "Primary DNS" fill DNS1 eg 202.134.1.10 and the "Secondary DNS" fill DNS2 eg 202.134.0.155 and if after click "OK"
 New TerminalPerform the testing ping out to the internet eg to google.com by typing ping google.com if results like this then your internet connection is connect.
 IP ==> == Hotspot> Hotspot SetupIn the "Hotspot Interface" select ether which want to make a hotspot, in this case, and if there is ether3 wireless LAN antenna you choose. Then click "Next"
 In the "Local Address of Network" is your Hotspot Gateway, and then click "Next"
 In the "Address Pool of Network" is a DHCP IP Range that will be provided to the user hotspot. You can specify how many want in terms of the IP range is from 10.5.50.2 s / d 10.5.50.254 then click "Next"
 In the "Select Certificate" select "none" and then click "Next"
 In the "IP Address of SMTP Server" leave blank and click "Next"
 In the "DNS Servers" already filled your DNS properly and immediately wrote click "Next"
 In the "DNS Name" leave it blank and click "Next"
 Then just click "Next"
 When finished it will display the following dialog box and then click "OK"
 Then continue with the configuration in order to connect to Hotspot Mikrotik Hotspot Billing software as follows:IP ==> Hotspot ==> Server Profiles ==> hsprof1 (2x click)From the "General" tab to move to the tab "Login" and then un-check (uncheck) the "Cookies" and then click "Apply"
 Then move to the tab "Radius" and un-check (uncheck) the "Use RADIUS" then click "Apply" and then click "OK"
 RadiusClick the plus sign | + | and on the General tab tick hotspot service later in the "Address" enter the IP Address Billing Hotspot radius server (Linux PC) and "Secret" secret id ie 123,457,890 fill as you fill in Linux, then if finished click "OK"
 In order for User Login Page Hotspot Billing Hotspot login page appears as shown below
 IP ==> == HotSpot> Walled GardenClick the plus sign | + | and to "Action = allow" select "Dst. Address "enter the IP number Hotspot Billing server, for example 192.168.1.10 and then click" OK "
 When finished upload your files into mikrotik already configured by software Hotspot Billing TeamThe next step in order to Hotspot Billing integrates with Mikrotik Router, you need to login to Billing Hotspot Manager. Enter your username, password, and security code correctly as shown below.
 After a successful entry into the Hotspot Billing Manager, log == Preferences Menu> Settings Service ==> Select / var / www / html / config.client.php then click "Edit" and when finished click "Save"$ IpServer = "192.168.1.2"; ==> enter the IP Server Hotspot Billing$ IpMikrotik = "192.168.1.10"; ==> enter the IP Router Mikrotik$ UserMikrotik = "admin"; ==> insert a user name Mikrotik Router$ PassMikrotik = "admin"; ==> enter password Mikrotik Router
 If you can not be saved into Konsole as root on Linux and type the command chmod 775 / var / www / html / config.client.phpLog Preferences ==> Settings Service ==> Select the / etc / raddb / clients.conf then click the "Edit" pull scroll to the bottom line and add the following four lines of command and when finished click "Save"client 192.168.1.2 ==> fill in the IP Router Mikrotiksecret = 123457890 ==> insert appropriate RADIUS secret Mikrotikshortname = proxy ==> insert a label with the name 'proxy'
 Log Preferences ==> Settings Service ==> Select the / etc / raddb / naslist then click "Edit"
 If you can not be saved into Konsole as root on Linux and type the command chmod 775 / etc / raddb / naslist